 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| New Product SS1P3 & SS1P4 Vishay General Semiconductor High Current Density Surface Mount Schottky Barrier Rectifiers eSMP TM Series DO-220AA (SMP) FEATURES * Very low profile - typical height of 1.0 mm * Ideal for automated placement * Low forward voltage drop, low power losses * High efficiency * Low thermal resistance * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. (Note: These devices are not Q101 qualified.) MECHANICAL DATA Case: DO-220AA (SMP) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes the cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM EAS VF TJ max. 1A 30 V, 40 V 30 A 10 mJ 0.40 V, 0.45 V 150 C MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load Non-repetitive avalanche energy at IAS = 1.5 A, L = 10 mH, TJ = 25 C Voltage rate of change (rated VR) Operating junction and storage temperature range VRRM IF(AV) IFSM EAS dV/dt TJ, TSTG SYMBOL SS1P3 13 30 1.0 30 10 10 000 - 55 to + 150 SS1P4 14 40 V A A mJ V/s C UNIT ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum reverse current at rated VR (2) Typical junction capacitance 4.0 V, 1 MHz TEST CONDITIONS IF = 1.0 A IF = 1.0 A TJ = 25 C TJ = 125 C TJ = 25 C TJ = 125 C SYMBOL VF IR CJ SS1P3 0.50 0.40 150 15 70 SS1P4 0.53 0.45 UNIT V A mA pF Notes: (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms Document Number: 88935 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product SS1P3 & SS1P4 Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Typical thermal resistance (1) SYMBOL RJA RJL RJC SS1P3 105 15 25 SS1P4 UNIT C/W Note: (1) Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 5.0 x 5.0 mm copper pad areas RJL is measured at the terminal of cathode band. RJC is measured at the top centre of the body ORDERING INFORMATION (Example) PREFERRED P/N SS1P3-E3/84A SS1P3-E3/85A UNIT WEIGHT (g) 0.024 0.024 PREFERRED PACKAGE CODE 84A 85A BASE QUANTITY 3000 10 000 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 1.2 0.6 Resistive or Inductive Load 1.0 0.5 SS1P4 D = 0.5 D = 0.3 D = 0.2 0.4 D = 0.1 0.3 T D = 1.0 D = 0.8 Average Forward Rectified Current (A) 0.8 0.6 Average Power Loss (W) 0.4 TL Measured at the Cathode Band Terminal 0.2 0.2 0.1 D = tp/T 0 100 125 150 0 0.2 0.4 0.6 0.8 1.0 tp 1.2 0 0 25 50 75 Lead Temperature (C) Average Forward Current (A) Figure 1. Maximum Forward Current Derating Curve Figure 3. Forward Power Loss Characteristics 0.6 SS1P3 0.5 D = 0.8 D = 0.5 0.4 D = 0.2 0.3 D = 0.1 0.2 D = 1.0 T D = 0.3 40 Peak Forward Surge Current (A) Average Power Loss (W) 30 20 10 0.1 D = tp/T 0 0 0.2 0.4 0.6 0.8 1.0 1.2 tp 0 1 10 100 Average Forward Current (A) Number of Cycles at 50 Hz Figure 2. Forward Power Loss Characteristics Figure 4. Typical Instantaneous Forward Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88935 Revision: 19-May-08 New Product SS1P3 & SS1P4 Vishay General Semiconductor 100 1000 Instantaneous Forward Current (A) 10 TJ = 125 C Junction Capacitance (pF) SS1P3 TJ = 150 C 100 1 TJ = 25 C 10 0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 5. Typical Instantaneous Forward Characteristics Figure 8. Typical Junction Capacitance 100 1000 TJ = 150 C 10 TJ = 125 C Transient Thermal Impedance (C/W) Instantaneous Forward Current (A) Junction to Ambient 100 1 TJ = 25 C 10 SS1P4 0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 6. Typical Instantaneous Forward Characteristics Figure 9. Typical Transient Thermal Impedatnce 1000 Instantaneous Reverse Current (mA) 100 10 1 0.1 0.01 0.001 TJ = 150 C TJ = 125 C TJ = 25 C 0.0001 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Figure 7. Typical Reverse Leakage Characteristics Document Number: 88935 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product SS1P3 & SS1P4 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) Cathode band 0.012 (0.30) REF. 0.086 (2.18) 0.074 (1.88) 0.053 (1.35) 0.041 (1.05) 0.036 (0.91) 0.024 (0.61) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) 0.100 (2.54) 0.025 0.030 (0.635) (0.762) 0.050 (1.27) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88935 Revision: 19-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of SS1P3-E384A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |